High Island Reservoir
James Chan, Rico Lee and Elizabeth Ride:
High Island Reservoir is the largest in Hong Kong by volume, [273 (3) /281 (1) (4) million cubic metres]. Plover Cove Reservoir has a larger area.
Courtesy: HKIE
Government Department: Water Supplies
Consultants: The reservoir was designed by Binnie & Partners as a part of the High Island Water Scheme which included pipeworks and other supporting infrastructure as well as the reservoir itself.
Contractor: Rico Lee – According to the text on the dolo-shaped memorial at the East main dam to those fallen in the course of the project, the general contractor (which erected the memorial) is Vianini S.p.A. Roma.
Commencement: December 1971 (1) / 1969 (3)
Completion: 1977 (1979?)
Inauguration: Rico Lee – Regarding the inauguration date of the project, it was around late-1978 or early-1979. The memorial stone on the project completion, now lying at the centre of the turnaround at the southeast end of the West main dam is dated 27 November 1978.
Cost: HKD1,348 million (4)
Project Description: High Island Water system entailed the construction of two main dams. One was built at the west of High Island connecting it with the Sai Kung Peninsula at Yuen Ng Fan (元五墳). The other was built in the southeast of High Island, connecting it with the Sai Kung Peninsula near Po Pin Chau island.
Three smaller dams were also constructed in valleys around the reservoir. Aqueducts totalling 5 miles in length were also constructed to transfer water from streams around the Sai Kung peninsula to the reservoir. (3)
Catching rainfall and carrying it to and from the reservoir, to eventually reach everyone’s home, required engineers to carve an astounding 40 kilometers tunnel through high rock, form 12 kilometers of catchwater channels, lay 13 kilometers of pipelines, build 9 pumping stations, construct 55 kilometers of roads and extend a treatment works. The system now catches and stores the rain from an area of 70 square kilometers over Sai Kung, Ma On Shan and Sha Tin.(1)
Two roads were created as part of the scheme, crossing over the dams.
Shui Keng Teng forms a large island within the reservoir.
Two large rock-filled dams (110 and 103 metres high) were completed in 1979. These closed the narrow strait between the mainland and the formerly separate High Island, and sea water was pumped out. The orginal catchment was too small (15 square kms), thus 40 kms of tunnels were built to divert fresh water to the reservoir, effectively adding 61 square kms to the drainage basin. Today the reservoir holds 281 million cubic metres of water, and when at full capacity, the surface stands 61.5 metres above sea level. To protect…the reservoir from storm waves, 7,000 concrete dolos ( an Afrikaans word for a sheep knuckle) were placed against a coffer dam that was originally used construction.
Material for dam construction were derived from two sites on the north side of the reservoir. Scars are still visible today. One quarry is located on the island of Shui Keng Teng and the other lies close to the main dam. Both were excavated into columnar-jointed tuffs which would not form blocks larger than 1.2 metres in diameter. Because this was too small for the outing facing of the dams, granite was imported from quarries at Turret Hill, in Sha Tin. Quarrying also took place at Nam Fung Shan, on the northwestern side of Long Harbour. (4)
Rico Lee: Below are my original photos of the memorial stone. The stone is a big piece of granite in English, the first image, and Chinese text, the second. The face with the Chinese text is facing northeast/towards the Pak Tam Chung direction of Sai Kung Man Yee Road while the face with the English text is facing southwest/East Dam direction of the same road.
It is worth mentioning that of all the memorial stones on the inauguration of major water schemes in Hong Kong I have encountered in person (Tai Tam Tuk, Shing Mun, Tai Lam, Plover Cove. High Island), the one for the High Island scheme is the only instance that there is an English AND Chinese text.
Elizabeth Ride: The following information has been extracted from Hong Kong Annual Reports.
See:
- High Island Reservoir – wikipedia
- Hong Kong Landscapes: Shaping the Barren Rock, B Owen & R Shaw, HKUP, 2007
- Why Hong Kong built reservoir to double its water storage, with rationing still a recent memory SCMP 2nd February 2018
Related Indhhk articles:
- Vianini Lavori SpA – general contractor High Island Reservoir
- Binnie & Partners, engineering consultancy, Hong Kong reservoirs and more…
- Shek Pik Reservoir – Construction
- Shek Pik Reservoir – Tai O Road construction link to end of Tai O salt production
- The Shing Mun (Jubilee) Reservoir
- Shing Mun Dam and Reservoir – article from the late 1930s
- Plover Cove Reservoir – 50th anniversary of relocation of residents
- Dragages Hong Kong – first HK projects, Kai Tak runway extension and Shek Pik reservoir
- Binnie & Partners, engineering consultancy, Hong Kong reservoirs and more…
- Gordon Burnett Gifford Hull – Needle Hill Mine, Shing Mun Reservoir
Two possible improvements:
(1) Cost: HKD1,348 million
(2) Her Royal Highness Princess Alexander officiated at a ceremony to mark the start of pumping into supply from the High Island Reservoir.
The cost of HKD1,348 million is confusing as the comma looks like a point. Is this font specially designed for the European way? Changing the font may be a long term solution. Should one replace the comma with a space, i.e. HK$1 348 million or HK$1.35 billion (use 2 decimal places).
Best wishes.
It should be Princess Alexandra
The Wiki quote a construction cost of 400 million which is far too low for a civil works of this scale.